| Processor/Cache: |
| Intel PIII processors
up to 1GHz with 256KB of L2 cache |
| Intel
Celeron processors up to 1GHz
with 128KB of L2 cache |
|
| System
Chipset: |
Intel 815E
supports FSB 133MHz |
| BIOS: |
Award
4MB PnP Flash BIOS |
| EIDE: |
4
x IDE Devices support ATA-100 |
| I/O: |
| Controller: iTE 8712 |
| Serial Ports: Two asynchronous,
1 x RS-232/1 x RS-232/422/485,
10-pin |
| Parallel Port: One bi-directional
with ECP/EPP/SPP support, 25-pin |
| Floppy Controller: Supports
for two drives (1.44MB for each) |
Keyboard/Mouse:
6-pin Mini-DIN connector for mouse
or keyboard
One internal 5-pin box-header
for mouse; One internal 5-pin
box-header for keyboard |
|
| System
Memory : |
Two
DIMM sockets support up to 512 MB of
SDRAM with ECC |
| USB: |
4
x USB Ports |
| IrDA: |
One
IrDA pin-header for wireless communications |
| LAN: |
Integrated
in 82801BA I/O Controller Hub (ICH2)
& Intel 82559 Supports 10/100BASE-T;
Onboard dual LAN, RJ-45 output; Wake
On LAN support |
| Watchdog
Timer: |
System
reset or non-maskable interrupt software
programmable time internal and jumper
selectable (64-level) |
| SSD: |
Onboard
DiskOnChip socket |
| Hardware
Monitoring: |
Detection
of CPU temperature, system temperature,
power failure and fan failure |
| ISA
High Drive: |
ISA
drive up to 64mA |
| OS
Compatibility: |
PC
and MS-DOS, Windows 3.x /95 /98 /NT4.0
/2000, Novell Netware, QNX, Linux Red
Hat 6.x, Solaris UNIX |
| MBTF: |
GEM
reports at least 50,000 hours |
| Safety Compliance: |
UL, CSA and
IEC |
| EMI/EMC
Compliance: |
FCC
Class A and CE Mark |
| VGA Interface: |
| 82815 Graphics and
AGP Memory Controller Hub (GMCH)
utilizes system memory for graphics,
O/S and complex applications |
| Max.
Resolution: 1600 x 1200 @ 256
bit colors |
| Onboard 4MB SDRAM |
|
| Operating
Temperature: |
0
- 60°C (32 - 140°F) |
| Storage Temperature: |
-20 to 85°C
(-4 to 185°F) |
| Relative
Humidity: |
95%,
non-condensing at temperature of 40°C
or 104°F |
| Dimensions: |
338mm x 122mm
(13.3" x 4.8")Conforms to
IEEE P996 PC/AT bus, PCI Rev. 2.1 and
PICMG Rev.2.0 standards |
| |
|
PRODUCTS
